Enjoy the ease and convenience of quick, effortless hole cutting with the Sailrite® Drill Hole Cutter Set. Traditional hole cutters usually require a hammer and a hard surface to punch the hole through the fabric, but you won’t have to worry about that with the Sailrite Drill Hole Cutters! These products secure to your drill for fast hole cutting.
This all-in-one kit includes everything you’ll need to cut holes in multiple layers of fabric, webbing and leather with low impact. Included are seven hole cutters in the following sizes: 1/8, 1/4, 5/16, 3/8, 7/16, 1/2 and 5/8 inch. Also included in the kit are the Sailrite® Cutting Block & Die Holder and a well-made carrying case to keep the hole cutters and cutting block safely stored so you don't lose any components.
Whether you’re sailing, at home or on the go, just secure these hole cutters to your drill to cut a hole in your desired material. This makes it that much easier to cut the holes needed for adding grommets, fasteners, tent wall hooks and shock cord cover clips to your application. They’re compatible with a 3/8” drill chuck or larger.
The Sailrite Cutting Block & Die Holder includes two cutting blocks in one! While you can use either block depending on your preference, we recommend using the gray block for cutting holes in loose-weave fabrics where the fibers stretch and the black block for cutting holes in dense or rigid fabrics so the blade can better sink into the block. This self-healing block set can be used over and over again and is compact enough to fit in any toolbox. And there's a handy wrist strap to hold it all together! Altogether, this kit is the most convenient, high-quality way to cut holes for your next home or marine DIY.
To use, secure this product in the drill chuck, place a cutting board behind the fabric on a hard, flat surface and firmly push the drill against the fabric to cut a hole. This is the best hole cutter system available today that allows for easy, portable hole cutting without the use of a heavy mallet! Standard household drill is not included.
- Sailrite Drill Hole Cutter 1/8"
- Sailrite Drill Hole Cutter 1/4"
- Sailrite Drill Hole Cutter 5/16"
- Sailrite Drill Hole Cutter 3/8"
- Sailrite Drill Hole Cutter 7/16"
- Sailrite Drill Hole Cutter 1/2"
- Sailrite Drill Hole Cutter 5/8"
- Sailrite Cutting Block & Die Holder