Quickly and easily make precise hole cuts in multiple layers of fabric, webbing and leather with low impact using this handy product. The Sailrite^® Drill Hole Cutter 3/8” is designed to secure to your drill and cut a hole through the material. Traditional hole cutters usually require a hammer and a hard surface to punch the hole through the fabric, but you won’t have to worry about that with the Sailrite Drill Hole Cutter! This product makes it that much easier to cut the holes needed for adding grommets, fasteners, tent wall hooks and shock cord cover clips to your application.

This product works smoothly alongside a small cutting block, like our Sailrite Cutting Block and Die Holder. They're compatible with a 3/8" drill chuck or larger.

To use, secure this product in the drill chuck, place a cutting board behind the fabric on a hard, flat surface and firmly push the drill against the fabric to cut a hole. When you use the Sailrite Cutting Block and Die Holder with a Sailrite Drill Hole Cutter, you can have portable hole cutting no matter where you are!

Note: Compatible with the Sailrite® HandyPress® (#125401).