You may also like
Sealing Blind Rivet for SnapRite® Surface Die is used to set studs with a standard rivet gun. This blind rivet is sealed at the end so no water will pass through. The rivet head is not sealed, but when used in conjunction with the SnapRite® Adhesive Backed Foam Rubber Gasket can achieve a leak-proof seal. This Sealing Blind Rivet is for use with the SnapRite® Surface Mount Stud Die.
|Hardware Material:||Metal, Stainless Steel (All Types), Stainless Steel 18-8|
|Shear Strength:||470 pounds|
|Tensile Strength:||490 pounds|
|Hole Size:||0.13 inch - 0.134 inch (Drill size #30)|
Rivet Leak Test for SnapRite Surface Mount Stud Die
Rivet Leak Test for SnapRite Surface Mount Stud Die Video puts the water tightness of three SnapRite rivets to the test. Learn the differences between the rivets and see how they hold up in a water leak test to determine which will best suit your application. These rivets are for use with the SnapRite Surface Mount Stud Die to install snap studs into hard surfaces.
You need to have the hole for this rivet EXACTLY the same size. I am talking mm size. 1mm and the rivet will pull thru the hole drilled! If you understand rivets, you will know with this style. I wasted my money!!!
We tested both the SnapRite Surface Mount Stud Die and the Sealing Blind Rivet and found that each performs exactly as expected when the stud is firmly set on a hard surface. We recommend that you ensure the die is held down firmly on to a hard surface. It may be that the snap stud being used are not the same specs as those offered by Sailrite, so we are open to testing the studs you are using.