You may also like
Use Stayput™ Fastener Shock Cord Cover Clips anywhere you need a piece of cloth held down securely — mooring, tonneau, boat covers or dodger curtains. The Shock Cord Cover Clip is installed by making a small hole in the fabric and snapping its self-locking sections together. Fully stretch the shock cord then relax it 2/3 of the way to find the proper installation location for the mating Shock Cord Lacing Knob.
Maximum fabric assembly thickness - 0.160"
Manufacturer's Note: Due to its UV characteristics, the White Shock Cord will have a shorter lifespan than the Black Shock Cord when continuously exposed to UV light.
|Knob Diameter:||1-1/8 inches|
|Knob Height:||9/16 inch|
|Shock Cord Diameter:||3/16 inch|
|Relaxed Length from Knob Center:||3 inches|
|Overall Relaxed Length:||3-1/2 inches|
|Pulled Tight Length from Knob Center:||4-1/2 inches|
|Overall Pulled Tight Length:||5 inches|
Installing & Replacing Stayput Shock Cord Cover Clips
Found multiple uses for this product
Replaced old cords on my boat cover. Great product and quality.
Work well. But I only needed the elastic bands not the plastic parts. The band's were out of stock so I bought the whole part, oh well. Good product.
Exactly what I needed to replace clips on a boat cover. Easy to install.
Simple Hold-down for Boat Cover.
This was a replacement for the same product on my boat cover. The clips & cord work great and were very easy to install. The snap connection is very sturdy and strong. What wears out over time and exposure to the sun is the small bungee cord.
I should have bought this sooner!
Exactly what we needed!