You may also like
Two-part hook with locking cover secures shock cord to hook without separate clamps or knots. Fits 3/16" - 1/4" cord.
|Overall Length:||1.87 inches|
|Inside Width of Eye Opening (from side to side):||0.33 inch|
|Inside Length of Eye Opening (up and down):||0.82 inch|
|Thickness of Hook Eye:||0.20 inch|
|Outside Width of Eye (from hook end to opposite side):||0.81 inch|
|ID of Cord Opening:||0.26 inch|
Better quality hooks
These hooks attach a lot better than cheaper hooks I bought from Amazon, which tended to pop off the cords. So far the first half-dozen or so have all connected well.
Strong clips that work perfect with the shock cord
Works perfectly in conjunction with the shock cord
Good holding power
Just what I needed at a good price
Makes for a nice clean shock cord fitting. May not be as strong as an all metal one, but for many purposes plenty strong enough.
these hooks are amazing. Works perfect fro me.
Worked well for us and our custom made shock cords. No slippage issue at all.
Bought a few years ago and husband BORROWED mine to make a few custom sized bungee cords. They work great and have not had any problems with slippage or fitting cords. I believe we bought several sizes. I am ordering more today along with three sizes of the smaller sizes of shock cord and including the larger version of this hook for more options.
I’m having a difficult time inserting the 1/4” cord into the 3/16-1/4 inch shock cord hook. Would appreciate any tips.
We realize the 1/4" shock cord is a tight fit. You might try trimming the end of the cord as seen in the video on the shock cord hook on our website. (link below) If you're still having difficulty, shoot us an email to firstname.lastname@example.org, or call us at 260-244-4647 and ask for Eric. :-) https://youtu.be/GeC0jYbaL9c
Too small for 1/4"
I like the concept, but I can not get these to assemble around 1/4" shock cord. Recommend getting the next size larger for use with 1/4".
1/4” tight fit.
Very difficult to fit 1/4” shock cord into.