You may also like
This is 2-piece telescoping support pole that adjusts from 48 to 96 inches which is used to add a center support for boat covers, canopies, tents, and so much more. Made from bright anodized aluminum tubing, this support pole is highly resistant to corrosion and wear.
There are three end fittings: the lower pole has a rubber cap on the end, the upper pole has a nylon pole end that fits a #2 grommet on one side and a pole end with a stainless steel snap stud on the opposite. Easy to expose or hide, just remove the rubber caps on either end of the inner pole to reveal the fittings.
|Length:||48 - 96 inches, Adjustable|
|Upper Pole Outside Diameter:||0.75 inch|
|Lower Pole Outside Diameter:||0.875 inch|
|Lower Pole Inside Diameter:||0.77 inch|
very solid replacement for other poorly designed compression adjustment pole that never held the height adjustment. just what I needed for pontoon boat cover in heaven wind and rain.
Should work, exactly what I needed to make the sun shade
These are my go-to mooring poles.
These are a great product. The set screw holds well and with a snap on one end or rod on the other, you can choose how you want to support the canvas.
Part is working well. Took longer than I like to have seen and rather expensive to ship for such light weight.
Glad to see the support pole is working for you! Items longer than 48" tend to have a little higher cost to ship, regardless of weight.