You may also like
This is 2-piece telescoping support pole that adjusts from 40 to 70 inches which is used to add a center support for boat covers, canopies, tents, and so much more. Made from bright anodized aluminum tubing, this support pole is highly resistant to corrosion and wear.
There are three end fittings: the lower pole has a rubber cap on the end, the upper pole has a nylon pole end that fits a #2 grommet on one side and a pole end with a stainless steel snap stud on the opposite. Easy to expose or hide, just remove the rubber caps on either end of the inner pole to reveal the fittings.
|Length:||40 - 70 inches, Adjustable|
|Upper Pole Outside Diameter:||0.75 inch|
|Lower Pole Outside Diameter:||0.875 inch|
|Lower Pole Inside Diameter:||0.77 inch|
Good quality strong support poles. Thank you!
Support pole work extremely well with boat vent 2. Very satisfied with product and service from Sailrite
I fixed the one I had. With the cost of shipping I will just keep it. I may need it another time.
Help for an aging, sagging canvas
My support poles arrived within a few days and have already proven their worth - a couple of tough storms that normally would have caused trouble for my sagging bridge canvas did no damage at all - the support poles provided the needed tenting, so the storm water did not pool, stretch, or otherwise damage my aging canvas. The pole also stayed in place - I admit I was surprised - though the winds were well over 40 mph and the canvas was heaving with it. Inexpensive and does the job. Thanks!
Exactly what I was needing
Adjustable Support Pole
These adjustable support poles are a good quality product and reasonably priced. As usual, the ordering process was a breeze, and shipment was quick. Love, love, love Sailrite !
Part is working well. Took longer than I like to have seen and rather expensive to ship for such light weight.
Glad to see the support pole is working for you! Items longer than 48" tend to have a little higher cost to ship, regardless of weight.