You may also like
Spur die sets are used for setting spur grommets, i.e., grommets with spurs or teeth all around the inside rim of the washer that lock into a rolled edge on the barrel part of the grommet. As a result, they will not easily pull out of the fabric. This die set will last a lifetime with proper care.
Note: A spur die is necessary for setting spur grommets.
Works great for me.
Although everyone says don't use a metal hammer, I did. But I was very careful about making sure I smacked the hand piece straight dead on. I am sure if you hit it side-ways or at an angle you would break the head. Worked very well to seat grommets in my Laser sail that I modified to be used without a sleeve. I did have to rotate around the grommet in order to get a flat crimp all the way around.
I expect quality when I buy tools and equipment and SAILRITE always delivers. My first choice for my sailing and rigging needs.
Worked as hoped it would
Handy tool to have...
Easy usage. Unbreakable. Handy to have if you are cruising and need to do some repair work.
Does the job
Looks like what I expected, haven’t reached that part of the project
not a precision instrument and factory coating is very nasty. wipe it off