This low VOC spray adhesive delivers professional, industrial-strength bonding for demanding applications involving foam, fabric, and a wide variety of other materials. Its fast-drying, clear formula bonds to paper, cardboard, plastic, metal, wood, and more, providing strong, reliable adhesion for high-stress projects and assemblies.

Designed for quick application and efficient coverage, the adhesive becomes tacky in as little as two minutes and offers a bonding window of up to ten minutes after tack-up. The adjustable-width lace spray pattern allows for controlled application with minimal overspray, while the non-yellowing formula dries clear for a clean, professional finish.

Coverage: Approximately 32 square feet (covering both surfaces once)

Shipping Note: This product is flammable and can only be shipped via ground service within the 48 contiguous United States. It cannot be shipped via the Post Office.

Features:

• Fast, aggressive tack for high-strength bonds
• Adjustable-width lace spray pattern with minimal overspray
• Non-yellowing formula dries clear
• Maximum service temperature of 170°F
• Synthetic elastomer formulation
• Low VOC formula

Directions for Use:

• Clean all bonding surfaces thoroughly to remove dust, dirt, oil, and contaminants before application.
• Adjust spray pattern width by turning the spray tip to the desired setting.
• Shake can well before each use for 5–10 seconds.
• Hold can 3"–5" from surfaces and apply a uniform coat of adhesive.
• Apply adhesive to both surfaces; one-surface bonding is not recommended.
• Allow adhesive to dry until aggressively tacky before bonding. Test tackiness by lightly touching with a knuckle—the adhesive should feel tacky without transferring.
• Apply firm pressure to ensure complete surface contact.
• To prevent nozzle clogging, invert can at the end of each day and spray until clear. Clean spray tip with turpentine if needed.
• Excess adhesive or overspray can be removed using 3M™ Specialty Adhesive Remover.