The Cable Tensioner Set is specifically designed for wire-hung canopy systems. It securely tensions and anchors the stainless-steel wire to the wooden beams of a pergola. To install, drill a ½” hole for softer wood or a 9/16" hole for harder wood to the depth of the tensioner (approximately 1 5/16 inches). The 316 stainless steel tensioners are then threaded into the wooden beams using a Cable Tensioner Driver (sold separately). The concealed, patented hardware ensures proper tensioning of a 5/32" wire rope for a wire-hung canopy system. Proudly made in the USA.

Note: Cable Tensioner Driver (#126969, sold separately) is required for installation.