Used at the corners of sails and anywhere a purchase on fabric is required. The rings are first sewn to the fabric with Sail Twine (this makes them much stronger than any "pressed" grommet like the brass spur grommet). Then the eyelet grommets are pressed inside to protect the thread from chafe.
This Eyelet requires a #9 Eyelet Die Set tool for installation (sold separately). Compatible with #8 hole cutter (1 inch).
Made exclusively for Sailrite in the USA.
|Hardware Material:||Brass, Metal|
|Overall Height (before installation):||0.64 inch|
|Outside Barrel Diameter:||1.125 inch|
|Inside Barrel Diameter:||1.053 inch|