HandyPress® 19mm (3/4") Hole Lower Spring Coil Insert
Exclusive
SKU: 126442
HandyPress® 19mm (3/4") Hole Lower Spring Coil Insert
Exclusive
SKU: 126442
$ 1 95
/ Each
Available: 31
Summary
Replacement 19mm (3/4") Hole Lower Spring Coil Insert for Sailrite HandyPress. Pairs with 19 x 25 x 3mm Washer and fits base hole. For lower dies.
Jump To:
Related Items
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® Washer 19 x 25 x 3mm
#126437
$1.95
HandyPress® Thumbscrew for Lower Adapter
#126444
$2.95
HandyPress® 9.53mm (3/8") Lower Hole Adapter
#126438
$9.95
HandyPress® 15.87mm (5/8") Lower Hole Adapter
#126439
$9.95
You May Also Like
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® 75mm Round Upper Press Plate
#126434
$24.95
HandyPress® Thread Upper Adapter (5/16"-18)
#126435
$6.95
HandyPress® 9.5mm Post With O-Ring Upper Adapter for Pres-N-Snap®
#126436
$8.95
HandyPress® Washer 19 x 25 x 3mm
#126437
$1.95
HandyPress® 9.53mm (3/8") Lower Hole Adapter
#126438
$9.95
HandyPress® 15.87mm (5/8") Lower Hole Adapter
#126439
$9.95
HandyPress® Cutting Board
#126440
$12.95
HandyPress® Wear-Resistant Gasket
#126441
$4.95
HandyPress® Aluminum Front Cover With Logo
#126443
$22.95
HandyPress® Thumbscrew for Lower Adapter
#126444
$2.95
HandyPress® Thumbscrew for Main Vertical Shaft
#126445
$1.95
HandyPress® Thumbscrew for Sliding Workbench
#126446
$4.95
HandyPress® Replacement Handle Grip
#126447
$7.95
HandyPress® Sliding Flat Workbench
#126458
$34.95
HandyPress® Ruler
#126459
$29.95
HandyPress® 9.5mm Upper/Lower Adapter Post With O-Rings for Snapmaster™
#126562
$7.95
HandyPress® Rail System
#126351
$138.95
HandyPress® Stamp Adapters
#3961-01
$45.95
HandyPress® Backstop Extender
#126803
$19.95
Description
This is a replacement 19mm (3/4") Hole Lower Spring Coil Insert for the Sailrite® HandyPress. It pairs with the 19 x 25 x 3mm Washer and sits in the 13/16" hole in the HandyPress base. For use with lower dies from Buckleguy.com® and KAMsnaps®. Stacks over the small hole on either side of the HandyPress base and loosely secures with a hex wrench for storage when not in use.
Please Note: This adapter was designed for the HandyPress. To see if it is compatible with your hand press check the dimensions tab and verify that it will attach to your press.
Specifications
Specifications
| Brand | HandyPress |
|---|---|
| Machine Series | HandyPress |
| Warranty | 90 Days |
Dimensions
Dimensions
| Front | |
|---|---|
| A. | 3/4" (19mm) |
| B. | 0.800" (20.33mm) |
| C. | 0.635" (16.13mm) |
Documents