HandyPress® 9.53mm (3/8") Lower Hole Adapter
SKU: 126438
HandyPress® 9.53mm (3/8") Lower Hole Adapter
SKU: 126438
Price per Each
Available: 95
$20 Off $250+
$100 Off $1,000+
$360 Off $3,000
Use Code: SEW4LESS
Ends 5/13/25, at 8 a.m. ET.
This replacement 9.53mm (3/8") Lower Hole Adapter for Sailrite HandyPress is compatible with dies from several different brands' installation tools.
Description
This is a replacement 9.53mm (3/8") Lower Hole Adapter for the Sailrite® HandyPress. It sits in the 13/16" hole in the HandyPress base. For use with lower dies of the “West Coast” type used by TandyPro®/Craftplus®, DOT® & Weaver™. Stacks over the small hole on either side of the HandyPress base and loosely secures with a hex wrench for storage when not in use.
Please Note: This adapter was designed for the HandyPress. To see if it is compatible with your hand press check the dimensions tab and verify that it will attach to your press.
Specifications
| Brand | HandyPress |
|---|---|
| Warranty | 90 Days |
Dimensions
Lower Hole Adapter
| A. | 3/8" (9.53mm) |
|---|---|
| B. | 0.591" (15.03mm) |
| C. | 0.709" (18mm) |