HandyPress® Thread Upper Adapter (5/16"-18)
Exclusive
SKU: 126435
HandyPress® Thread Upper Adapter (5/16"-18)
Exclusive
SKU: 126435
$ 6 95
/ Each
Available: 17
Summary
This replacement 5/16"-18 Thread Upper Adapter for the Sailrite HandyPress attaches to the main vertical shaft. Use with Buckleguy and KAMsnaps dies.
Jump To:
Related Items
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® 9.5mm Post With O-Ring Upper Adapter for Pres-N-Snap®
#126436
$8.95
HandyPress® 9.5mm Upper/Lower Adapter Post With O-Rings for Snapmaster™
#126562
$7.95
HandyPress® 19mm (3/4") Hole Lower Spring Coil Insert
#126442
$1.95
HandyPress® Washer 19 x 25 x 3mm
#126437
$1.95
HandyPress® 75mm Round Upper Press Plate
#126434
$24.95
You May Also Like
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® 75mm Round Upper Press Plate
#126434
$24.95
HandyPress® 9.5mm Post With O-Ring Upper Adapter for Pres-N-Snap®
#126436
$8.95
HandyPress® Washer 19 x 25 x 3mm
#126437
$1.95
HandyPress® 9.53mm (3/8") Lower Hole Adapter
#126438
$9.95
HandyPress® 15.87mm (5/8") Lower Hole Adapter
#126439
$9.95
HandyPress® Cutting Board
#126440
$12.95
HandyPress® Wear-Resistant Gasket
#126441
$4.95
HandyPress® 19mm (3/4") Hole Lower Spring Coil Insert
#126442
$1.95
HandyPress® Aluminum Front Cover With Logo
#126443
$22.95
HandyPress® Thumbscrew for Lower Adapter
#126444
$2.95
HandyPress® Thumbscrew for Main Vertical Shaft
#126445
$1.95
HandyPress® Thumbscrew for Sliding Workbench
#126446
$4.95
HandyPress® Replacement Handle Grip
#126447
$7.95
HandyPress® Sliding Flat Workbench
#126458
$34.95
HandyPress® Ruler
#126459
$29.95
HandyPress® 9.5mm Upper/Lower Adapter Post With O-Rings for Snapmaster™
#126562
$7.95
HandyPress® Rail System
#126351
$138.95
HandyPress® Stamp Adapters
#3961-01
$45.95
HandyPress® Backstop Extender
#126803
$19.95
Description
This is a replacement 5/16"-18 Thread Upper Adapter for the Sailrite® HandyPress®. It attaches to the main vertical shaft's 5/8"-20 thread outer diameter. For use with upper dies from Buckleguy.com® and KAMsnaps®. Screws onto a threaded nub on either side of the HandyPress for storage when not in use.
Please Note: This adapter was designed for the HandyPress. To see if it is compatible with your hand press check the dimensions tab and verify that it will attach to your press.
Specifications
Specifications
| Brand | HandyPress |
|---|---|
| Machine Series | HandyPress |
| Warranty | 90 Days |
Dimensions
Dimensions
HandyPress® Thread Upper Adapter (5/16"-18)
| A. | 5/16"-18 |
|---|---|
| B. | 19.91mm (0.784") |
Documents