HandyPress® 9.5mm Upper/Lower Adapter Post With O-Rings for Snapmaster™
Exclusive
SKU: 126562
HandyPress® 9.5mm Upper/Lower Adapter Post With O-Rings for Snapmaster™
Exclusive
SKU: 126562
Price per Each
$ 5 95
Available: 8
Buy More, Save More!
$25 Off $250+
$60 Off $500+
$200 Off $1,500+
$450 Off $3,000+
Use Code: STACKUP
Ends 5/17/25, at 8 a.m. ET.
$25 Off $250+
$60 Off $500+
$200 Off $1,500+
$450 Off $3,000+
Use Code: STACKUP
Ends 5/17/25, at 8 a.m. ET.
Summary
Replacement 9.5mm Upper/Lower Adapter Post With O-Rings for Sailrite HandyPress. Use with upper and lower dies for the DOT Snapmaster Press.
Documents (1)
Jump To:
Description
This is one replacement adapter for the Sailrite® HandyPress® (set screw NOT included). Two of these adapters were included with your HandyPress.
Two of these adapters are required to use a Snapmaster die set with the HandyPress. The top adapter fits into the 9.53mm (3/8") hole in the main vertical shaft. The bottom adapter pairs with the 9.53mm (3/8") Lower Hole Adapter and is inserted into the hole in the HandyPress base plate.
Note: For use with upper and lower dies for the DOT® Snapmaster™ Press Model 89CM840.
Specifications
Specifications
| Brand | HandyPress |
|---|---|
| Warranty | 90 Days |
Dimensions
Dimensions
Upper/Lower Adapter Post with O-Rings
| A. | 9.5mm |
|---|---|
| B. | 35.04mm (1.38") |