HandyPress® 15.87mm (5/8") Lower Hole Adapter
Exclusive
SKU: 126439
HandyPress® 15.87mm (5/8") Lower Hole Adapter
Exclusive
SKU: 126439
$ 9 95
/ Each
Available: 97
Summary
This replacement 15.87mm (5/8") Lower Hole Adapter for Sailrite HandyPress sits in the 13/16" hole in the machine base. For C.S. Osborne lower dies.
Jump To:
Related Items
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® 9.53mm (3/8") Lower Hole Adapter
#126438
$9.95
HandyPress® 10mm (25/64") Lower Hole Adapter
#127058
$10.95
HandyPress® Thumbscrew for Lower Adapter
#126444
$2.95
HandyPress® Washer 19 x 25 x 3mm
#126437
$1.95
HandyPress® 19mm (3/4") Hole Lower Spring Coil Insert
#126442
$1.95
You May Also Like
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® 75mm Round Upper Press Plate
#126434
$24.95
HandyPress® Thread Upper Adapter (5/16"-18)
#126435
$6.95
HandyPress® 9.5mm Post With O-Ring Upper Adapter for Pres-N-Snap®
#126436
$8.95
HandyPress® Washer 19 x 25 x 3mm
#126437
$1.95
HandyPress® 9.53mm (3/8") Lower Hole Adapter
#126438
$9.95
HandyPress® Cutting Board
#126440
$12.95
HandyPress® Wear-Resistant Gasket
#126441
$4.95
HandyPress® 19mm (3/4") Hole Lower Spring Coil Insert
#126442
$1.95
HandyPress® Aluminum Front Cover With Logo
#126443
$22.95
HandyPress® Thumbscrew for Lower Adapter
#126444
$2.95
HandyPress® Thumbscrew for Main Vertical Shaft
#126445
$1.95
HandyPress® Thumbscrew for Sliding Workbench
#126446
$4.95
HandyPress® Replacement Handle Grip
#126447
$7.95
HandyPress® Sliding Flat Workbench
#126458
$34.95
HandyPress® Ruler
#126459
$29.95
HandyPress® 9.5mm Upper/Lower Adapter Post With O-Rings for Snapmaster™
#126562
$7.95
HandyPress® Rail System
#126351
$138.95
HandyPress® Stamp Adapters
#3961-01
$45.95
HandyPress® Backstop Extender
#126803
$19.95
Description
This is a replacement 15.87mm (5/8") Lower Hole Adapter for the Sailrite® HandyPress. It sits in the 13/16" hole in the HandyPress base. For use with lower dies from C.S. Osborne. Stacks over the small hole on either side of the HandyPress base and loosely secures with a hex wrench for storage when not in use.
Please Note: This adapter was designed for the HandyPress. To see if it is compatible with your hand press check the dimensions tab and verify that it will attach to your press.
Specifications
Specifications
| Brand | HandyPress |
|---|---|
| Machine Series | HandyPress |
| Warranty | 90 Days |
Dimensions
Dimensions
Lower Hole Adapter
| A. | 5/8" (15.87mm) |
|---|---|
| B. | 0.590" (14.99mm) |
| C. | 0.709" (18mm) |
Documents