The #10 Silver Stainless Steel Zipper Top Stop is a slider stop for shortened #10 molded tooth zippers. A top stop is a component found at the top of a zipper that keeps the slider from running off the zipper track. Use this stop with #10 continuous or separating molded tooth zippers from YKK® or Lenzip®.

Note: Two top stops are required — one for each side of the zipper.

How to Install:

• Using scissors, cut the zipper to the length you need. Pull the slider back to separate the zipper sides to work with each half.
• Place the stainless steel top stop over the next-to-last tooth on one side of the zipper tape.
• Using pliers, crimp the top stop firmly into place.
• Repeat this process for the zipper tape on the opposite side.
• Use a hotknife or a similar tool to seal the cut ends of the zipper tape.

Features:

• Stops the slider at the top of a zipper chain.
• Made of durable stainless steel.
• Easy to install.
• Use with #10 continuous or separating molded tooth zippers from YKK or Lenzip.