HandyPress® 10mm (25/64") Lower Hole Adapter
SKU: 127058
HandyPress® 10mm (25/64") Lower Hole Adapter
SKU: 127058
$ 10 95
/ Each
Available: 27
Summary
Designed to allow the use of KAM Snap Dies in the HandyPress.
Jump To:
Related Items
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® Stitching Chisel & Die Adapter (M8-1.25)
#126863
$7.95
HandyPress® 9.53mm (3/8") Lower Hole Adapter
#126438
$9.95
HandyPress® 15.87mm (5/8") Lower Hole Adapter
#126439
$9.95
HandyPress® Thumbscrew for Lower Adapter
#126444
$2.95
HandyPress® 19mm (3/4") Hole Lower Spring Coil Insert
#126442
$1.95
HandyPress® Washer 19 x 25 x 3mm
#126437
$1.95
You May Also Like
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® 75mm Round Upper Press Plate
#126434
$24.95
HandyPress® Thread Upper Adapter (5/16"-18)
#126435
$6.95
HandyPress® 9.5mm Post With O-Ring Upper Adapter for Pres-N-Snap®
#126436
$8.95
HandyPress® Washer 19 x 25 x 3mm
#126437
$1.95
HandyPress® 9.53mm (3/8") Lower Hole Adapter
#126438
$9.95
HandyPress® 15.87mm (5/8") Lower Hole Adapter
#126439
$9.95
HandyPress® Cutting Board
#126440
$12.95
HandyPress® Wear-Resistant Gasket
#126441
$4.95
HandyPress® 19mm (3/4") Hole Lower Spring Coil Insert
#126442
$1.95
HandyPress® Aluminum Front Cover With Logo
#126443
$22.95
HandyPress® Thumbscrew for Lower Adapter
#126444
$2.95
HandyPress® Thumbscrew for Main Vertical Shaft
#126445
$1.95
HandyPress® Thumbscrew for Sliding Workbench
#126446
$4.95
HandyPress® Replacement Handle Grip
#126447
$7.95
HandyPress® Sliding Flat Workbench
#126458
$34.95
HandyPress® Ruler
#126459
$29.95
HandyPress® 9.5mm Upper/Lower Adapter Post With O-Rings for Snapmaster™
#126562
$7.95
HandyPress® Rail System
#126351
$138.95
HandyPress® Stamp Adapters
#3961-01
$45.95
Description
A 10mm (25/64") Lower Hole Adapter for the Sailrite® HandyPress. It sits in the 13/16" hole in the HandyPress base. For use with KAM Snap dies. Stacks over the small hole on either side of the HandyPress base and loosely secures with a hex wrench for storage when not in use.
Please Note: This adapter was designed for the HandyPress. To see if it is compatible with your hand press check the dimensions tab and verify that it will attach to your press.
Specifications
Specifications
| Brand | HandyPress |
|---|---|
| Machine Series | HandyPress |
| Warranty | 90 Days |
Dimensions
Dimensions
| HandyPress® 10mm (25/64") Lower Hole Adapter | |
|---|---|
| A. | 25/64" (10mm) |
| B. | 0.709" (18mm) |
| C. | 0.591" (15.03mm) |
Documents