This Loxx® Pull It Up Fastener Set is a complete cloth-to-surface installation with a two screw, oval stud. Loxx fasteners secure automatically and lock until the button component is pulled. This positive engagement is created by a stainless steel spring inside the upper head that fits around the ball head of the stud. The result is a fastener that won’t accidentally come undone but is still easy to operate. Choose these fasteners for applications where security and performance are paramount.
Loxx fasteners are made from nickel-plated brass and are ideal for hard environments. Their heavy-duty construction ensures they will perform snap after snap, even on difficult applications. A Locking Key or Locking Tool (sold separately) is required for installation.
This fastener set will work with fabrics 0.065 - 0.125 inch (1.65 - 3.18mm) thick. This is approximately 3-6 layers of fabric.
To Install: Cut a 3/8-inch hole at the installation point (we recommend a Hole Cutter or Spin Cut Tool – sold separately). Unscrew the washer from the head/stud if not already done. Place the threaded post of the head/stud through the hole and loosely screw the washer on from the opposite side. Holding the application, tighten the washer using the Locking Key or Locking Tool (each sold separately).
- 1 (5PK) Pull It Up Fastener Button
- 1 (5PK) 1" Oval Plate Stud
- 1 (10PK) Screw Flat Head 6 x 1/2" Stainless Steel
|Hardware Material:||Brass, Metal, Nickel Plated|