Loxx® Pull It Up Fastener Cloth-to-Surface Set for Thick Assemblies (Black Nickel-Plated Chrome)

This Loxx® Pull It Up Fastener Set is a complete cloth-to-surface fastener installation set for thick assemblies. The black chrome finish gives these fasteners a sleek, modern look. Loxx fasteners secure automatically and lock until the button component is pulled. This positive engagement is created by a stainless steel spring inside the upper head that fits around the ball head of the stud. The result is a fastener that won’t accidentally come undone but is still easy to operate. Choose these fasteners for applications where security and performance are paramount.

Loxx fasteners are ideal for hard environments. Their heavy-duty construction ensures they will perform snap after snap, even on difficult applications. A Locking Key or Locking Tool (sold separately) is required for installation.

This fastener set will work with fabrics 0.087 - 0.174 inch (2.2 - 4.44mm) thick. This is approximately 4-8 layers of fabric.

To Install: Cut a 3/8-inch hole at the installation point (we recommend a hole cutter – sold separately). Unscrew the washer from the head/stud if not already done. Place the threaded post of the head/stud through the hole and loosely screw the washer on from the opposite side. Holding the application, tighten the washer using the Locking Key or Locking Tool (each sold separately).

Includes:

• Loxx Pull It Up Fastener Upper Head With Long Washer (Black Chrome-Plated Brass) (#121849)
• Loxx Pull It Up Fastener Oval Plate Stud 1" (Nickel-Plated Brass) (#121351)
• Screw Flat Head 6 x 1/2" (777040)