The Loxx® Pull It Up Fastener Lower Stud with Regular Washer is the two-part lower section of a Loxx Fastener System. Included is both the threaded stud and the washer to make a complete lower section for a cloth-to-cloth installation. Loxx fasteners secure automatically and lock tight until the button is pulled. This positive engagement is created by a stainless steel spring inside the upper head that fits around the ball head of the stud. The result is a fastener that won’t accidentally come undone, but is still easy to operate.

Loxx fasteners are made from nickel-plated brass and are ideal for hard environments. Their heavy-duty construction ensures they will perform snap after snap, even in difficult applications.

This fastener set will work with fabrics 0.065"-0.125" (1.65-3.18mm) thick. This is approximately 3-6 layers of fabric.

To Install: Cut a 3/8" hole at the installation point (we recommend a Hole Cutter or Spin Cut Tool – sold separately). Unscrew the washer from the head/stud if not already done. Place the threaded post of the head/stud through the hole and loosely screw the washer on from the opposite side. Holding the application, tighten the washer using the Locking Key or Locking Tool (each sold separately).