The Loxx® Pull It Up Fastener Upper Head with Long Washer is the two-part upper section of the Loxx Fastener System. The Black Chrome finish of these fasteners gives them a sleek, modern, uniform look. This longer thread version is made to accommodate thicker fabric assemblies than the regular washer upper heads. Included are both the button and the clinch nut to make a complete upper section (you will receive them screwed together). This button is compatible with any lower section stud for cloth-to-cloth and cloth-to-surface applications. Loxx fasteners secure automatically and lock tight until the button is pulled. This positive engagement is created by a stainless steel spring inside the upper head that fits around the ball head of the stud. The result is a fastener that won’t accidentally come undone, but is still easy to operate.

These Loxx fasteners are made from brass and are ideal for hard environments. Their heavy-duty construction ensures they will perform snap after snap, even in difficult applications.

The long thread on this fastener works with fabrics 0.087"-0.175" (2.2-4.445mm) thick or approximately 4-8 layers of fabric.

To Install: Cut a 3/8" hole at the installation point (we recommend a hole cutter – sold separately). Unscrew the washer from the head/stud if not already done. Place the threaded post of the head/stud through the hole and loosely screw the washer on from the opposite side. Holding the application, tighten the washer using the Locking Key or Locking Tool (each sold separately).