HandyPress® Thread Upper Adapter (1/4"-20)
SKU: 127131
HandyPress® Thread Upper Adapter (1/4"-20)
SKU: 127131
$ 6 95
/ Each
Available: 17
Summary
Use Grommet Mart and ClipsShop™ dies on your Sailrite® HandyPress®. This 1/4"-20 upper adapter installs easily and stores on the press when not in use.
Jump To:
Related Items
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® 12mm (1/2") Lower Hole & SnapRite Adapter Combo
#127132
$13.95
#1 Self-Piercing Grommet Die Set 5/16"
#127163
$49.95
#2 Self-Piercing Grommet Die Set 3/8"
#127164
$53.95
#3 Self-Piercing Grommet Die Set 7/16"
#127165
$58.95
#4 Self-Piercing Grommet Die Set 1/2"
#127166
$61.95
#5 Self-Piercing Grommet Die Set 5/8"
#127167
$68.95
You May Also Like
Sailrite® HandyPress® - Universal Hand Press Tool for Grommets, Snaps, Rivets & More
#125401
$499.95
HandyPress® 75mm Round Upper Press Plate
#126434
$24.95
HandyPress® Thread Upper Adapter (5/16"-18)
#126435
$6.95
HandyPress® 9.5mm Post With O-Ring Upper Adapter for Pres-N-Snap®
#126436
$8.95
HandyPress® Washer 19 x 25 x 3mm
#126437
$1.95
HandyPress® 9.53mm (3/8") Lower Hole Adapter
#126438
$9.95
HandyPress® 15.87mm (5/8") Lower Hole Adapter
#126439
$9.95
HandyPress® Cutting Board
#126440
$12.95
HandyPress® Wear-Resistant Gasket
#126441
$4.95
HandyPress® 19mm (3/4") Hole Lower Spring Coil Insert
#126442
$1.95
HandyPress® Aluminum Front Cover With Logo
#126443
$22.95
HandyPress® Thumbscrew for Lower Adapter
#126444
$2.95
HandyPress® Thumbscrew for Main Vertical Shaft
#126445
$1.95
HandyPress® Thumbscrew for Sliding Workbench
#126446
$4.95
HandyPress® Replacement Handle Grip
#126447
$7.95
HandyPress® Sliding Flat Workbench
#126458
$34.95
HandyPress® Ruler
#126459
$29.95
HandyPress® 9.5mm Upper/Lower Adapter Post With O-Rings for Snapmaster™
#126562
$7.95
HandyPress® Rail System
#126351
$138.95
HandyPress® Stamp Adapters
#3961-01
$45.95
Description
This is a 1/4"-20 Thread Upper Adapter for the Sailrite® HandyPress®. It attaches to the main vertical shaft's 5/8"-20 thread outer diameter. For use with upper dies from Micron® America (Grommet Mart) and ClipsShop™. The adapter screws onto a threaded nub on either side of the HandyPress for storage when not in use.
Please Note: This adapter was designed for the HandyPress. To see if it is compatible with your hand press, check the dimensions tab and verify that it will attach to your press.
Specifications
Specifications
| Brand | HandyPress |
|---|---|
| Machine Series | HandyPress |
| Warranty | 90 Days |
Dimensions
Dimensions
| HandyPress® Thread Upper Adapter (1/4"-20) | |
|---|---|
| A. | 5/8" - 20 |
| HandyPress® Thread Upper Adapter (1/4"-20) | |
|---|---|
| B. | 1/4" - 20 |