A 12mm (1/2") Lower Hole Adapter for the Sailrite® HandyPress. It sits in the 13/16" hole in the HandyPress base. For use with lower dies from Micron® America (Grommet Mart) and ClipsShop™. However, this adapter doubles as a way to use Sailrite's SnapRite® dies to set snap fasteners. The adapter holds the "coin-shaped" SnapRite® Eyelet Die.  The adapter stacks over the small hole on either side of the HandyPress base and loosely secures with a hex wrench for storage when not in use.

Please Note: This adapter was designed for the HandyPress. To see if it is compatible with your hand press check the dimensions tab and verify that it will attach to your press.