DOT® Lift‑The‑DOT® Standard Legs Socket (Nickel‑Plated Brass)

4 Ways to Install the Lift-the-Dot Socket:

1. Use a knife to cut 4 small slits in the fabric for the socket's teeth and pliers to secure the socket to the backing plate. Then cut the center hole out with knife or hot knife.<br> 2. Use the “Lift The Dot Hole Cutter” to punch holes for the center hole and 4 slits for the legs at the same time. Insert the socket into the slits and backplate on the back side then bend the 4 prongs over with pliers.<br> 3. Use the “Lift The Dot Deluxe Hand Punch” to punch the center hole and 4 slits with an lever action tool.<br> 4. The “Snapmaster Hand Press” can punch the hole & 4 slits all at once. Then it can press the Lift the Dot socket into place bending the 4 legs over the back plate.