Loxx® Pull It Up Fastener Cloth-to-Cloth Set for Thick Assemblies (Antique Brass)

This Loxx^® Pull It Up Fastener Set is a complete cloth-to-cloth fastener installation set for thick assemblies. The antique brass finish gives these fasteners a weathered, vintage-inspired look without compromising on quality. Loxx fasteners secure automatically and lock until the button component is pulled. This positive engagement is created by a stainless steel spring inside the upper head that fits around the ball head of the stud. The result is a fastener that won’t accidentally come undone but is still easy to operate. Choose these fasteners for applications where security and performance are paramount.

These Loxx fasteners are made from brass and are ideal for hard environments. Their heavy-duty construction ensures they will perform snap after snap, even on difficult applications. A Locking Key or Locking Tool (sold separately) is required for installation.

This fastener set will work with fabrics 0.087 - 0.174 inch (2.2 - 4.44mm) thick. This is approximately 4-8 layers of fabric.

To Install: Cut a 3/8-inch hole at the installation point (we recommend a hole cutter – sold separately). Unscrew the washer from the head/stud if not already done. Place the threaded post of the head/stud through the hole and loosely screw the washer on from the opposite side. Holding the application, tighten the washer using the Locking Key or Locking Tool (each sold separately).

Includes:

• Loxx Pull It Up Fastener Upper Head With Long Washer (Antique Brass)(#121848)
• Loxx Pull It Up Fastener Lower Stud With Long Washer (Antique Brass)(#122003)