You may also like
DOT® Snap Fastener Button 1/4" is made of top quality nickel-plated brass and is used for cloth-to-cloth and cloth-to-surface applications. The button rivets to a socket (sold separately). The installed button and socket can then be snapped to a stud. For cloth-to-surface installations, use a stud with an integrated screw and for cloth-to-cloth applications use a stud in conjunction with an eyelet.
DOT snap fasteners are excellent for covers, cushions, dodgers, biminis and other applications. DOT snap fasteners can be used as a forestay hank for sails under 100 square feet when installed on tabs of fabric or webbing.
|Hardware Material:||Brass, Metal, Nickel Plated|
|Assembly Thickness:||From 3/64" to 1/8"|
Received exactly what I ordered in a timely manner
amazing quality! no more west marine junk!
these snaps are incredible, especially when applied with the press-N-snap tool. I spent hundreds on snaps from west marine that literally broke everytime I took the cover off my boat, these snaps DO NOT disintegrate like west marine snaps, and they are easy to pop off and do so without breaking!! greatest product I have purchased in a long time.
Good product, terrible shipping.
The longer shank holds best and isn’t too thick. Only problem was using the USPS - took three weeks to get to me. Recommend using ANY other carrier.
Very impressive quality, typical from Sailrite
Exactly the part I needed. Excellent service and communication.
Nickel Snap Buttons
I just finished making a forward bimini extension on my H33 and used these to attach the side edges to the frame bow. Initially, I used the normal action snaps but needed more resistance. I then ordered the hard action snaps. I had to drill these buttons out and reset them. I followed the Sailrite video and these were easy to remove using a drill and were very easy to attach using the $2.95 installation tool. Worked great.
Thicker layers top snap
Very good self piercing snap for thicker layers. Works very well with my snap tool!