Copperhead Sail Data

# X-SD-6280

Sailboat Description

The Copperhead was designed by Macalpine-Downie and Gibbs and built by MFG. The large 8' cockpit carries two in comfort while maintaining her speed and performance. There are only two rigging lines needed, main halyard and main sheet. The lightweight hull allows for easy car top transport.

LOA 13'9"
Beam 4'5"
Sail Area 85 sq. ft.
Draft 4" up and 2'6' down
Weight 135 lbs.
Floatation Polyurethane Foam

Are you interested in sewing a custom sail?

Popular Sail Kits

We offer easy-to-order kits for our most popular standard sails. These include sails for common home-built boat models as well as smaller, high-production boats.

Browse Products for this Boat on the right to see if there is a popular sail kit available for your boat.

If you don't see the sail you're looking for, we can also create a custom sail kit!

Boat Specifications

Length13.75 ft
Builder/DesignerMacal-pine-Downie and Gibbs
Source of DataOwner Measurements

Sail Data


Comments14.5" Roach, 3 battens, luff sleeve to fit 2" Diameter mast.

*A computer algorithm was used to determine this figure based on partial data (usually the I, J, E, and P). These data points should be carefully checked. More Details >

Please Note: Most of our sail dimensions are based on class rules, designer blueprints, or measurements of sails. These dimensions are intended as starting points only. Sailboats are not all uniform, even from the same designer. We recommend carefully measuring your boat if you are uncertain about dimensions.

All dimensions are intended to be maximum and smaller sails are not wrong.

We've limited our listing to the sails most commonly used, but these are not the only ones appropriate for a given boat.