Rebel 16 Sail Data

# X-SD-6688

Sailboat Description

600 lbs. Beam - 6' 7 1/2" Draft - 3' 6"

Are you interested in sewing a custom sail?

Popular Sail Kits

We offer easy-to-order kits for our most popular standard sails. These include sails for common home-built boat models as well as smaller, high-production boats.

Browse Products for this Boat on the right to see if there is a popular sail kit available for your boat.

If you don't see the sail you're looking for, we can also create a custom sail kit!

Boat Specifications

Length16.1 ft
Builder/DesignerRay Greene
Source of DataClass Rules

Rig Dimensions

I
18ft
(5486mm)
J
4.25ft
(1295mm)
P
22.29ft
(6793mm)
E
11ft
(3352mm)
I2/P2
n/a
J2/E2
n/a

Sail Data

Jibsail

Luff15ft
Foot7ft
Leech13.5ft
Headn/a
Clew-Throatn/a
Stayn/a
CommentsWindow size not limited. Wire luff reinforcement. Snap fastener tabs are normal instead of piston pull snaps. Mid-foot to head measurement no greater than 14'6".

Mainsail

Luff22.25ft
Foot11ft
Leech23.83ft
Head0.42ft
Clew-Throatn/a
Stayn/a
CommentsMidgirth is 7'3". Four battens max 3'4" each.

*A computer algorithm was used to determine this figure based on partial data (usually the I, J, E, and P). These data points should be carefully checked. More Details >

Please Note: Most of our sail dimensions are based on class rules, designer blueprints, or measurements of sails. These dimensions are intended as starting points only. Sailboats are not all uniform, even from the same designer. We recommend carefully measuring your boat if you are uncertain about dimensions.

All dimensions are intended to be maximum and smaller sails are not wrong.

We've limited our listing to the sails most commonly used, but these are not the only ones appropriate for a given boat.