You may also like
Sew it yourself! Welsford Navigator Jib Sail Kit lets you make your own jibsail. This kit is made from 4 oz. white Dacron® using the designer's plans and features a wire luff for a small boat furler. Computer plotted with seaming and hem lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!
Construction requires a #4 Spur Die Set for corner grommets. All other supplies to build your sail are included; all you need are scissors and a sewing machine!
Each Sail Kit comes with complete written instructions.
- 4oz White Dacron® Sailcloth, patterned and pre-cut
- V-69 Polyester Thread
- Seamstick Basting Tape
- #16 Hand Sewing Needle
- 5-ply Waxed Twine Bobbin
- 2-3oz Pearl Grey Leather
- Dacron® 4-inch Tape (non-adhesive backed)
- 3/32 inch 1/19 Stainless luff wire
- Stainless steel thimbles
- #4 Spur Grommets
- Nicopress sleeves
- Adhesive Sailrite Logo
Also Required (Sold Separately):
- #4 Spur Die Set
|Luff:||11 feet, 6.58 inches|
|Foot:||6 feet, 1.43 inches|
|Leech:||8 feet, 11 inches|