You may also like
Sew it yourself! Ranger 26 100% Working Jib Sail Kit lets you make your own genoa jib sail. This crosscut kit is made from 6.4 oz. white Dacron® using the designer's plans and features a rope-reinforced luff, brass hanks on the luff, and leechline. Computer plotted with seaming and hem lines plotted right on the cloth, this sail kit can be made on a home sewing machine. All panels and patches are computer cut and ready for basting and sewing. Complete instructions and support from Sailrite means there is no guess work!
Construction requires a #1 Spur Die Set for grommet installation (sold separately). All other supplies to build your sail are included; all you need are scissors and a sewing machine!
Each Sail Kit comes with complete written instructions.
Sail Kit Includes:
- 6.4oz White Dacron® Sailcloth, patterned and pre-cut
- White V-92 Polyester Thread
- Seamstick Basting Tape
- #16 Hand Sewing Needle
- 5-ply Waxed Twine Bobbin
- Pearl Grey Leather
- Dacron© 2" Folded Tape (non-adhesive backed)
- Dacron© 4" Folded Tape (non-adhesive backed)
- Classic 3-Strand White Polyester Rope
- Dacron© Leechline
- Stainless Steel Thimbles
- Round Stainless Steel Rings 1-¼"
- 2" Polyester Webbing
- #1 Brass hanks
- #1 Spur Grommets
- #3 D-Ring with Bar
- Gransegel Cleat Large
- Adhesive Sailrite Logo
Also Required (sold separately):
- #1 Spur Die Set
|Luff:||28 feet, 6 inches|
|Foot:||13 feet, 2.75 inches|
|Leech:||24 feet, 3.75 inches|
|Area:||158 square feet|
Offline viewing of PDF documents requires Adobe Reader.Download Adobe Reader >